Back to index Back to index Home Home 2CV restoration -
Citroën's 2CV users manual -
Page 10b		 << Page 10a Page 11 >>
Starting:
Page 10b Fig. 15

Fig. 15 - Starting the engine (L.H.D.)
1 - Anti-theft/ignition/starter switch
2 - Choke control with warning lamp
3 - Engine oil pressure warning lamp
Choke control (Fig. 15 to 18)
Choke (2)must be used only when the engine is cold.
The incorporated warning lamp remains on as long as the button has not been fully pushed home.
See instructions below, under "Starting"
Before starting  
A quick glance at the "Pre-start check list" on the back cover can avoid oversight.
Page 10b Fig. 16

Fig. 16 - Starting the engine (L.H.D.)
1 - Anti-theft/ignition/starter switch
2 - Choke control with warning lamp
3 - Engine oil pressure warning lamp
Starting the engine (Fig. 15 to 18)
Do not run the engine in an enclosed space.

After a long stop or when the temperature is very cold, first "free" the engine using the start handle without switching on the ignition or using the choke.
  • Make sure that the gear lever is in neutral and the handbrake is on.
  • Turn the ignition key to position 2 (Fig. 14).
    The oil pressure warning lamp (3) should light up.
Back to top Back to top Back to index Back to index << Page 10a Page 11 >>